Pin this crochet fingerless mitts pattern free to your favorite boards
Check out this crochet fingerless mitts pattern free and practice some fun basic Tunisian crochet stitches.
Keywords: crochet fingerless mitts pattern free, tunisian crochet stitches, free tunisian crochet patterns, tunisian crochet patterns free, free crochet patterns, crochet gloves without fingers, crochet gloves pattern fingerless, easy fingerless gloves crochet pattern, free crochet pattern for fingerless gloves, half finger gloves crochet pattern, fingerless gloves crochet pattern dk, crochet fingerless mitts pattern free, warmest fingerless mittens, how to crochet fingerless gloves for beginners, easy fingerless gloves to crochet, tunisian crochet fingerless gloves, tunisian crochet fingerless gloves free pattern, tunisian fingerless gloves pattern, tunisian crochet patterns, fingerless gloves crochet free pattern, tunisian crochet fingerless gloves pattern
This pattern is for fun beginner-friendly Tunisian crochet fingerless mitts with custom-fit instructions that can be completed in 1 to 2 hours. It’s the perfect fingerless mitts pattern to practice the basic Tunisian crochet simple and purl stitches! The best part is that it’s a one-skein project and works up super fast so it’s great for market prep and gift making! You can make a matching pair for your little one as well.
Crochet Fingerless Mitts Inspiration:
A few weeks ago, I received some happy mail in the form of another fun Hobbii Challenge. This time, we were asked to try out the Hobbii Upcycled Alpaca Blend yarn. At the end of last year, I had been toying with the idea of designing fingerless mitts but I couldn’t decide on what stitch combination to use. When I received this yarn, I just knew I had to make the fingerless mitts a reality! I loved working with this yarn, it was super soft and not scratchy like other varieties of wool yarns!
I used a combination of the Tunisian crochet crossed stitch and Tunisian crochet purl stitch to give some nice stitch definition and a ribbing effect. I am really happy with the way they turned out, I hope you love making them!
This pattern was showcased as part of the 2024 International Crochet Month Blog Hop! Marie from Underground Crafter has put together this blog hop featuring fun new patterns throughout the month.
Every day during March, a new, permanently free crochet pattern was released. You can make these projects to keep, for gifts, or to donate to charity while chatting with other crocheters and sharing your projects to win giveaway prizes!
Visit Underground Crafter to get links to each International Crochet Month Blog Hop post.
About Crochet Fingerless Mitts Pattern:
About the Pattern:
Skill Level: Beginner
Yarn:
Hobbii Upcycled Alpaca Blend in Oat Milk,
Approximately 120 yards for Women’s Large size (Size 4 worsted weight; 3.5 oz/ 100 g, 218 yd/ 200 m; 34% Acrylic, 33% Alpaca, 33% Wool)
Yarn sub alternatives:
We Crochet Upcycle Alpaca Blend Worsted, Ice Yarns Alpaca Light Magic, Ice Yarns Norsk, Cascade Yarns Pacific, We Crochet Altiplano
https://yarnsub.com/yarns/hobbii/upcycled_alpaca_blend
STACKED SAVINGS FOR NATIONAL CROCHET MONTH ON WE CROCHET
Hook:
- Size L-11 8.0 mm Tunisian crochet hook, I used my Furls Cruella Deville Tunisian Crochet Hook, I also love using Clover Takumi Tunisian crochet hooks, check them out the set here.
Notions:
Gauge:
- Gauge is 15 sts over 12 rows in Tunisian simple stitch for a 4 x 4 in. square.
Finished Size:
- Women’s Large fits 8 in. hand circumference. The finished mitt has a circumference of 8.5 in. and length of 7.5 in. The finished circumference for S/M is 7 in.
Instructions provided for a custom fit.
BOGO SALE, Buy 1 get 1 50% off 12mm and 15 mm Streamline hooks, use code SLBOGO50!
Crochet Fingerless Mitts Pattern Notes:
This pattern is for fun beginner-friendly Tunisian crochet fingerless mitts with custom-fit instructions that can be completed in 1 to 2 hours. It’s the perfect fingerless mitts pattern to practice the basic Tunisian crochet simple and purl stitches! The best part is that it’s a one-skein project and works up super fast so it’s great for market prep and gift making! You can make a matching pair for your little one as well.
Abbreviations (US terms):
Ch: Chain
Tss: Tunisian simple stitch
Tps: Tunisian purl stitch
Sk: Skip
RetP: Return Pass -Explained below
St(s): Stitches
This pattern uses a few Tunisian crochet techniques. Use the following video tutorials as needed:
FOUNDATION ROW, TUNISIAN SIMPLE STITCH
HOW TO TUNISIAN CROSSED STITCH
HOW TO TUNISIAN PURL STITCH
HOW TO BIND OFF IN TUNISIAN CROCHET
- Pattern rows are Forward pass instructions.
- The following instructions are implied:
- The loop already on the hook at the beginning of the row counts as the first st.
- Always Tunisian simple stitch in the last st of the row, being sure to work under both loops of the st.
- Return Pass: Follow the foundation row and each row with the Return Pass in the same color unless a color change is needed.
- Return Pass Instructions: Ch 1, *yarn over, pull through two loops; repeat from * until 1 loop remains on the hook.
Notes About Sizing for the Crochet Fingerless Mitts Pattern:
- Measure your gauge swatch across unstretched and stretched. Note the two numbers and subtract to find the difference. This is how much you will need to subtract from the hand circumference measurement to determine width for a tighter fit.
- Measure your hand circumference and length using the schematic below. Measure your hand circumference by wrapping your tape measure around your knuckles. Measure the length by measuring from your knuckles to 2 in. below your wrist.
- Calculate stitches per inch by dividing the number of stitches by inches of gauge swatch. For example: The gauge swatch measurement was 15 sts per 4 inches. 15 divided by 4 = 3.75 sts per inch.
- Use the measurements to calculate number of stitches to chain
- For a regular fit, example:
- For an 8 in. hand circumference, you will need to chain (8 in. x 3.75 sts) = 30 sts (for this pattern you will need a multiple of 6 + 2 so we will do 32 sts) for a total width of approximately 8 in.
- Calculate using the above method to find out how many stitches you need to chain. Substitute this number for X in the pattern below.
- For an 8 in. hand circumference, you will need to chain (8 in. x 3.75 sts) = 30 sts (for this pattern you will need a multiple of 6 + 2 so we will do 32 sts) for a total width of approximately 8 in.
- For a regular fit, example:
- For a tighter fit, example:
- The gauge swatch stretched is 5 in. and unstretched it is 4 in. 5 – 4 = 1 in. You will need to subtract 1 in. from the hand circumference measurement.
- 8 in. hand circumference – 1 in. = 7 in. This means you will need to chain (7 in. x 3.75 sts) = 26.25 sts (for this pattern you will need a multiple of 6 + 2 so we will do 24 sts + 2 = 26 sts) for a total width of approximately 7 in.
- Calculate using the above method to find out how many stitches you need to chain. Substitute this number for X in the pattern below.
- The gauge swatch stretched is 5 in. and unstretched it is 4 in. 5 – 4 = 1 in. You will need to subtract 1 in. from the hand circumference measurement.
- Measure from your knuckles to 2 in. below your wrist. This is the length you will need to complete. Substitute this number for Y in the pattern below.
Schematic:
Standard Hand Circumference Measurements (from Craft Yarn Council)
AGE | HAND CIRCUMFERENCE (in.) |
Children | |
2-4 yrs | 5 |
4-6 yrs | 6 |
6-8 yrs | 6.5 |
Women | |
Small | 7 |
Medium | 7.5 |
Large | 8 |
Men | |
Small | 8 |
Medium | 8.5 |
Large | 9 |
NEW RELEASE FURLS EBONY LUCET FORK
NEW EBONY ACCESSORIES BUNDLE ON FURLS
Crochet Fingerless Mitts Pattern Instructions:
Ch X (based on my calculations and gauge, ch 32 for Women’s Large; ch 26 is suggested for Women’s Small and Medium for a regular fit)
Row 1 (Foundation Row): Pick up a loop in the back bump of each chain. Complete normal RetP. (X stitches)
Row 2: [(Sk st, tss, tss in skipped st) two times, tps 2], repeat [ ] to the end of the row, work last st as normal.
Repeat Row 2 until you reach the desired length as calculated above (Y) For the sample, I continued to 7.5 in. for a hand circumference of 8 in. based on my calculations and measurements.
Bind off and leave a 12 in. tail, cut yarn. With the wrong side facing out, fold in half as shown below. Leave a 1 in. hole for the thumb and attach locking stitch markers to signify beginning and end of thumb hole. Using the leftover tail, whip stitch along the edge leaving the thumb hole open.
Leaving a 6 in. tail, cut yarn. Weave in all loose ends and turn the finished mitt right side out. Repeat instructions for a second mitt.
You are done! Have any questions? The best way to reach me is via email: noorsknits@gmail.com
Share your finished mitts with me on social media using the hashtag #TunisianMirageMitts for a chance to be featured!
Instagram @noorsknits Facebook @noorsknits1
This is an original pattern from Noor’s Knits, ©2024. Please do not reprint, repost, or sell any parts of this pattern, but feel free to link back to my blog. You are welcome to sell finished items made from this pattern but please kindly link back to my website. Send questions to noorsknits@gmail.com.